Gmail Calendar Docs Reader La Web Más »
Grupos visitados recientemente | Ayuda | Acceder
Página principal de Grupos de Google
12AX7, 7025, ECC83. ETC
En este grupo hay demasiados temas que deben mostrarse primero. Para que este aparezca al principio de la lista, debes descartar esta opción para alguno de los anteriores.
Error al procesar tu solicitud. Por favor, inténtalo de nuevo.
marcar
  8 mensajes - Ocultar todos  -  Traducir todo al Traducido (ver todos los originales)
El grupo al cual envías entradas es un grupo Usenet. Si envías mensajes a este grupo, cualquier usuario de Internet podrá ver tu dirección de correo electrónico
Tu respuesta no se ha enviado.
Tu entrada se ha publicado correctamente.
 
De:
Para:
Cc:
Seguimiento:
Añadir Cc | Añadir seguimiento | Editar asunto
Asunto:
Validación:
Con fines de verificación, escribe los caracteres que veas en la imagen siguiente o los números que escuches haciendo clic en el icono de accesibilidad. Escucha y escribe los números que oyes.
 
captainvideo462002@yahoo. com  
Ver perfil   Traducir al Traducido (ver original)
 Más opciones 3 nov 2009, 18:07
Grupos de noticias: sci.electronics.repair
De: "captainvideo462...@yahoo.com" <captainvideo462...@yahoo.com>
Fecha: Tue, 3 Nov 2009 13:07:50 -0800 (PST)
Local: Mart 3 nov 2009 18:07
Asunto: 12AX7, 7025, ECC83. ETC
I have a Fender reissue model guitar amp in for service. It has 2
Fender 12AX7's that are microphonic. These are Chinese manufacture. I
have replaced them with 5814's which is some sort of 12AU7 type just
to get the amp working. There is no more microphonic problem, however
the amplifier sensitivity is now somewhat lower so perhaps that may
have a bearing on this. I realise that I have no 12AX7's in the shop
at all and would like to buy several, two for this amplifier and two
or three for stock. I was looking at NOS and JAN types online and
would like to go with either but I suffered real sticker shock when I
noticed the prices. I don't have much faith in the Russian or Chinese
tubes so I was hoping that someone could offer some advice as to a
source for good preamp tubes either new or tested used, and ones that
I don't have to worry about microphonics. Thanks, Lenny.

    Reenviar  
Debes registrarte antes de enviar mensajes.
Para enviar una entrada, antes deberás formar parte del grupo.
Antes de enviar entradas, actualiza tu alias en la configuración de la suscripción.
No dispones del permiso necesario para enviar entradas.
Martin Whybrow  
Ver perfil   Traducir al Traducido (ver original)
 Más opciones 4 nov 2009, 17:16
Grupos de noticias: sci.electronics.repair
De: "Martin Whybrow" <aholeinthegro...@ntlworld.com>
Fecha: Wed, 4 Nov 2009 20:16:07 -0000
Local: Mié 4 nov 2009 17:16
Asunto: Re: 12AX7, 7025, ECC83. ETC

<captainvideo462...@yahoo.com> wrote in message

news:3c177e12-0103-4c13-9001-9b151e157cd2@l2g2000yqd.googlegroups.com...
>I have a Fender reissue model guitar amp in for service. It has 2
> Fender 12AX7's that are microphonic. These are Chinese manufacture. I
> have replaced them with 5814's which is some sort of 12AU7 type just
> to get the amp working. There is no more microphonic problem, however
> the amplifier sensitivity is now somewhat lower so perhaps that may
> have a bearing on this. I realise that I have no 12AX7's in the shop
> at all and would like to buy several, two for this amplifier and two
> or three for stock. I was looking at NOS and JAN types online and
> would like to go with either but I suffered real sticker shock when I
> noticed the prices. I don't have much faith in the Russian or Chinese
> tubes so I was hoping that someone could offer some advice as to a
> source for good preamp tubes either new or tested used, and ones that
> I don't have to worry about microphonics. Thanks, Lenny.

I've had some complete junk Chinese tubes, e.g. power output pentodes that
burned the cathode resistors on the first use due to internal shorts. I've
had good luck with Russian tubes however, the Svetlana ones seem to be very
good but you must make sure they're the St.Petersburg manufactured ones and
not the Sovtek ones; see the bottom of this page for more information:
http://www.amp-fix.com/biasing%5B1%5D.htm
Martin
--
martin<dot here>whybrow<at here>ntlworld<dot here>com

    Reenviar  
Debes registrarte antes de enviar mensajes.
Para enviar una entrada, antes deberás formar parte del grupo.
Antes de enviar entradas, actualiza tu alias en la configuración de la suscripción.
No dispones del permiso necesario para enviar entradas.
Tim Schwartz  
Ver perfil   Traducir al Traducido (ver original)
 Más opciones 5 nov 2009, 09:47
Grupos de noticias: sci.electronics.repair
De: Tim Schwartz <t...@bristolnj.com>
Fecha: Thu, 05 Nov 2009 07:47:25 -0500
Local: Jue 5 nov 2009 09:47
Asunto: Re: 12AX7, 7025, ECC83. ETC

captainvideo462...@yahoo.com wrote:
> I have a Fender reissue model guitar amp in for service. It has 2
> Fender 12AX7's that are microphonic. These are Chinese manufacture. I
> have replaced them with 5814's which is some sort of 12AU7 type just
> to get the amp working. There is no more microphonic problem, however
> the amplifier sensitivity is now somewhat lower so perhaps that may
> have a bearing on this. I realise that I have no 12AX7's in the shop
> at all and would like to buy several, two for this amplifier and two
> or three for stock. I was looking at NOS and JAN types online and
> would like to go with either but I suffered real sticker shock when I
> noticed the prices. I don't have much faith in the Russian or Chinese
> tubes so I was hoping that someone could offer some advice as to a
> source for good preamp tubes either new or tested used, and ones that
> I don't have to worry about microphonics. Thanks, Lenny.

Dave,

        I've had good success with the JJ/Tesla tubes (from Slovakia as I
recall)  They usually run around $10-15 each.  One vendor that has them
is Antique Electronic Supply (www.tubesandmore.com).  They have various
grades of the things.  I'm speaking form a standpoint of reliability.
We could have an endless discussion (and tread) about the sound quality
of various tubes which I'd rather avoid.

Regards,
Tim Schwartz
Bristol Electronics


    Reenviar  
Debes registrarte antes de enviar mensajes.
Para enviar una entrada, antes deberás formar parte del grupo.
Antes de enviar entradas, actualiza tu alias en la configuración de la suscripción.
No dispones del permiso necesario para enviar entradas.
Arfa Daily  
Ver perfil   Traducir al Traducido (ver original)
 Más opciones 16 nov 2009, 22:42
Grupos de noticias: sci.electronics.repair
De: "Arfa Daily" <arfa.da...@ntlworld.com>
Fecha: Tue, 17 Nov 2009 01:42:02 -0000
Local: Lun 16 nov 2009 22:42
Asunto: Re: 12AX7, 7025, ECC83. ETC

<captainvideo462...@yahoo.com> wrote in message

news:3c177e12-0103-4c13-9001-9b151e157cd2@l2g2000yqd.googlegroups.com...

>I have a Fender reissue model guitar amp in for service. It has 2
> Fender 12AX7's that are microphonic. These are Chinese manufacture. I
> have replaced them with 5814's which is some sort of 12AU7 type just
> to get the amp working. There is no more microphonic problem, however
> the amplifier sensitivity is now somewhat lower so perhaps that may
> have a bearing on this. I realise that I have no 12AX7's in the shop
> at all and would like to buy several, two for this amplifier and two
> or three for stock. I was looking at NOS and JAN types online and
> would like to go with either but I suffered real sticker shock when I
> noticed the prices. I don't have much faith in the Russian or Chinese
> tubes so I was hoping that someone could offer some advice as to a
> source for good preamp tubes either new or tested used, and ones that
> I don't have to worry about microphonics. Thanks, Lenny.

The shop that I do a lot of work for uses many Russian tubes, and I have, in
general, not found them to be a problem either reliability, spec or
microphony wise. Brands that he stocks are, for instance, Ruby and Electro
Harmonix. Do you have a music shop in your area ? They all stock replacement
tubes over here, so I guess they would there too. Genuine Fender supplied
tubes are not all that expensive, and likewise, Marshalls. However, preamp
tubes such as 12AX7 do tend to come in quality levels. For instance, some of
the 12AX7s that this particular shop stocks, are specced as "Premium Grade"
and retail for 21 GBP (around $33) each, although obviously not that much to
buy trade ...

Arfa


    Reenviar  
Debes registrarte antes de enviar mensajes.
Para enviar una entrada, antes deberás formar parte del grupo.
Antes de enviar entradas, actualiza tu alias en la configuración de la suscripción.
No dispones del permiso necesario para enviar entradas.
captainvideo462002@yahoo. com  
Ver perfil   Traducir al Traducido (ver original)
 Más opciones 17 nov 2009, 00:54
Grupos de noticias: sci.electronics.repair
De: "captainvideo462...@yahoo.com" <captainvideo462...@yahoo.com>
Fecha: Mon, 16 Nov 2009 19:54:29 -0800 (PST)
Local: Mart 17 nov 2009 00:54
Asunto: Re: 12AX7, 7025, ECC83. ETC
On Nov 16, 8:42 pm, "Arfa Daily" <arfa.da...@ntlworld.com> wrote:

I've heard good things about Electro Harmonix from other people too.
Maybe  I'll try some of these. Thanks, Lenny

    Reenviar  
Debes registrarte antes de enviar mensajes.
Para enviar una entrada, antes deberás formar parte del grupo.
Antes de enviar entradas, actualiza tu alias en la configuración de la suscripción.
No dispones del permiso necesario para enviar entradas.
Arfa Daily  
Ver perfil   Traducir al Traducido (ver original)
 Más opciones 17 nov 2009, 06:18
Grupos de noticias: sci.electronics.repair
De: "Arfa Daily" <arfa.da...@ntlworld.com>
Fecha: Tue, 17 Nov 2009 09:18:24 -0000
Local: Mart 17 nov 2009 06:18
Asunto: Re: 12AX7, 7025, ECC83. ETC

<captainvideo462...@yahoo.com> wrote in message

news:8c071b79-87ab-4cc8-9578-14797409c851@a31g2000yqn.googlegroups.com...
On Nov 16, 8:42 pm, "Arfa Daily" <arfa.da...@ntlworld.com> wrote:

I've heard good things about Electro Harmonix from other people too.
Maybe  I'll try some of these. Thanks, Lenny

I've certainly not had a problem with them, Lenny, and my friend's shop
sells quite a lot of them as 'general' customer replacements. Matching does
seem to have been done by them with some care, on output tubes that are sold
as being a matched pair or quad.

Arfa


    Reenviar  
Debes registrarte antes de enviar mensajes.
Para enviar una entrada, antes deberás formar parte del grupo.
Antes de enviar entradas, actualiza tu alias en la configuración de la suscripción.
No dispones del permiso necesario para enviar entradas.
Tim Schwartz  
Ver perfil   Traducir al Traducido (ver original)
 Más opciones 17 nov 2009, 10:48
Grupos de noticias: sci.electronics.repair
De: Tim Schwartz <t...@bristolnj.com>
Fecha: Tue, 17 Nov 2009 08:48:06 -0500
Local: Mart 17 nov 2009 10:48
Asunto: Re: 12AX7, 7025, ECC83. ETC

Good morning all,

        I'll have to disagree with at least SOME of the Electro Harmonix tubes.
  I've had nothing but grief with their 7591's.  Bias drifting all over
the place, and in one case trashing an output transformer.

Regards,
Tim Schwartz
Bristol Electronics


    Reenviar  
Debes registrarte antes de enviar mensajes.
Para enviar una entrada, antes deberás formar parte del grupo.
Antes de enviar entradas, actualiza tu alias en la configuración de la suscripción.
No dispones del permiso necesario para enviar entradas.
Arfa Daily  
Ver perfil   Traducir al Traducido (ver original)
 Más opciones 18 nov 2009, 06:22
Grupos de noticias: sci.electronics.repair
De: "Arfa Daily" <arfa.da...@ntlworld.com>
Fecha: Wed, 18 Nov 2009 09:22:35 -0000
Local: Mié 18 nov 2009 06:22
Asunto: Re: 12AX7, 7025, ECC83. ETC

"Meat Plow" <m...@petitmorte.net> wrote in message

news:39rhpe.rec.17.3@news.alt.net...

Hmmm. That's odd. I can't honestly say that I've had any particular problems
with EH tubes. I have to say that most of the ones that my friend stocks in
his shop are Ruby brand, but a fair few are EH, and he's not the sort of
bloke to continue stocking a product that was giving him any trouble. Apart
from anything else, he's a muso himself, who has been in the sales / repair
/ hire business for this sort of kit, for many many years. Interestingly
though, Rubys *are* made in China ... They are available in the U.S.   see

http://www.magicparts.com/main.htm

and then "Dealers".

Seems that Fender themselves are shipping with Groove Tubes now ...    see

http://www.kellyindustries.com/guitars/fender_tubes.html

Arfa


    Reenviar  
Debes registrarte antes de enviar mensajes.
Para enviar una entrada, antes deberás formar parte del grupo.
Antes de enviar entradas, actualiza tu alias en la configuración de la suscripción.
No dispones del permiso necesario para enviar entradas.
Fin de los mensajes
« Volver a “Debates” « Tema más reciente     Tema anterior »

Crear un grupo - Grupos de Google - Página principal de Google - Condiciones del servicio - Política de privacidad
©2010 Google