Should this halogen bulb work off a 24 volt socket? - sci.electronics.repair

Mensaje del debate Should this halogen bulb work off a 24 volt socket?

default

Ver perfil

Más opciones 15 oct 2006, 10:27

Grupos de noticias: sci.electronics.design, sci.electronics.repair

De: default <defa...@defaulter.net>

Fecha: Sun, 15 Oct 2006 09:27:27 -0400

Local: Dom 15 oct 2006 10:27

Asunto: Re: Should this halogen bulb work off a 24 volt socket?

  Responder al autor
  |
  Reenviar | Imprimir | Ver secuencia
  | Mostrar mensaje original
  | Informar de este mensaje | Buscar mensajes de este autor
  

On Sun, 15 Oct 2006 12:22:14 +0100, Eeyore

<rabbitsfriendsandrelati...@hotmail.com> wrote:

>HiC wrote:

>> Looking to power a mini halogen bulb to do film capture. It would be great
>> if I could power it off the movie projector itself without having to get an
>> additional power supply. The socket for the projector reads slightly over
>> 24v. However, the lamps it uses are 21v. Someone has stated that load is a
>> factor. Does that mean that the voltage needs to be higher than the bulb
>> rating or not necessarily?

>> What I wonder is if this 24v bulb should work off the 24v socket on the
>> projector?

>I'd be more concerned about overloading the transformer in the projector
>myself.

>Graham

He seems to be implying that the 24 volts is measured output and 21
volts is the proper bulb for the projector - so the voltage under load
is expected to be lower. In that case using a 24 volt lamp to replace
a 21 volt one will be less strain on the transformer.

----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----

Responder al autor Reenviar