Mensaje del debate Glue Suggestions to attach rubber feet to a laptop.

Path: g2news2.google.com!news3.google.com!news.glorb.com!newshub.sdsu.edu!elnk-nf2-pas!newsfeed.earthlink.net!stamper.news.pas.earthlink.net!newsread3.news.pas.earthlink.net.POSTED!b1a104da!not-for-mail
Message-ID: <450498E6.65EEFC06@earthlink.net>
From: "Michael A. Terrell" <mike.terr...@earthlink.net>
Reply-To: mike.terr...@earthlink.net
Organization: http://home.earthlink.net/~mike.terrell/
X-Mailer: Mozilla 4.78 [en]C-CCK-MCD   (Win98; U)
X-Accept-Language: en
MIME-Version: 1.0
Newsgroups: sci.electronics.repair
Subject: Re: Glue Suggestions to attach rubber feet to a laptop.
References: <Q_-dnYW6qf3aCpnYnZ2dnUVZ_ridnZ2d@comcast.com>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Lines: 24
Date: Sun, 10 Sep 2006 23:00:07 GMT
NNTP-Posting-Host: 24.110.34.161
X-Complaints-To: abuse@earthlink.net
X-Trace: newsread3.news.pas.earthlink.net 1157929207 24.110.34.161 (Sun, 10 Sep 2006 16:00:07 PDT)
NNTP-Posting-Date: Sun, 10 Sep 2006 16:00:07 PDT

Michael Kennedy wrote:
> 
> The little rubber feet on the bottom of my Presario v2000 have come off and
> I've lost them so I cut some new ones out of some rubber. I've temporally
> attached them with double sided tape but this will not hold them for long
> because of their size (4mm x 12mm) and lateral stress from pushing the
> laptop around on a table.
> 
> What do you guys think the best glue would be to use for this? I've thought
> about using cyanoacrylate glue but that seems like it might be a bad choice.
> Especially if it doesn't bond well you can't ever get that junk off.


   I've always used contact cement.  I've glued hundreds, if not
thousands of feet back on equipment and don't remember ever seeing one
come off again.

-- 
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida